Clear Filters | 1181 - 1200 of 20958 results

Red Flag 25-2 Expands International Collaboration and Multi-Domain Integration

A Turkish F-16 assigned to the 132nd Squadron lands before the start of Red Flag-Nellis 25-2 at Nellis Air Force Base, Nevada, March 5, 2025. International partners from the United Arab Emirates Air Force, Royal Saudi Air Force, and Turkish Air Force provide mutually beneficial educational and operational opportunities while promoting long-term relationships and interoperability with international militaries. (U.S. Air Force photo by William R. Lewis)
Details Download

250304-A-QL286-1005

U.S. Army Spc. Mahdi Amirouche, assigned to 82nd Airborne Division, prepares to launch an individual launched drone during Project Convergence - Capstone 5 (PC-C5) at Fort Irwin, Calif. The small, short-range drone can be used for reconnaissance, surveillance, and target acquisition. CAPSTONE 5 is a culmination of numerous preceding exercises, experimentations, and events; it provides a critical venue to identify and refine DOTMLPF-P recommendations necessary to transform the Army and ensure future war-winning readiness and is underpinned by analysis. (U.S. Army photo by Sgt. Matthew Wantroba)
Details Download

Lightning strikes the 125th Fighter Wing

An aircraft maintainer assigned to the Florida Air National Guard's 125th Maintenance Group marshals in a F-35A Lightning II aircraft during its arrival at the 125th Fighter Wing located in Jacksonville, Florida, March 4, 2025. The arrival marks the unit’s transition to the fifth-generation fighter aircraft, enhancing the wing’s 24/7 homeland defense mission and strengthening joint-force integration efforts in Florida. (U.S. Air National Guard photo by Staff Sgt. Jacob Hancock)
Details Download

Air Force designates two Mission Design Series for collaborative combat aircraft

Concepts of the uncrewed fighter aircraft YFQ-42A (bottom) and the YFQ-44A are pictured in artwork. The aircraft are designed to leverage autonomous capabilities and crewed-uncrewed teaming to defeat enemy threats in contested environments. (U.S. Air Force artwork courtesy of General Atomics Aeronautical Systems, Inc. and Anduril Industries)
Details Download

CSAF AFA keynote address

Air Force Chief of Staff Gen. David Allvin speaks during a keynote address at the Air and Space Forces Association Warfare Symposium in Aurora, Colo., March 3, 2025. (U.S. Air Force photo by Staff Sgt. Adam R. Shanks)
Details Download

CSAF AFA keynote address

Air Force Chief of Staff Gen. David Allvin speaks during a keynote address at the Air and Space Forces Association Warfare Symposium in Aurora, Colo., March 3, 2025. (U.S. Air Force photo by Staff Sgt. Adam R. Shanks)
Details Download

CSAF AFA keynote address

Air Force Chief of Staff Gen. David Allvin speaks during a keynote address at the Air and Space Forces Association Warfare Symposium in Aurora, Colo., March 3, 2025. (U.S. Air Force photo by Staff Sgt. Adam R. Shanks)
Details Download

20th Equipment Maintenance Squadron Airmen use new chromate-free primer

U.S. Air Force Airman Jasmin Ali, 20th Component Maintenance Squadron aircraft structural maintenance apprentice, prepares an F-16 Fighting Falcon to have new HS2118 primer applied at Shaw Air Force Base, March 3, 2025. Shaw’s use of HS2118 primer marks a significant step in improving both safety and aircraft maintenance practices at Shaw Air Force Base. (U.S. Air Force photo by Senior Airman Meghan Hutton)
Details Download

20th Equipment Maintenance Squadron Airmen use new chromate-free primer

U.S. Air Force Airman 1st Class Jonathan Saulters, 20th Component Maintenance Squadron aircraft structural maintenance journeymen, stands clothed in individual protection equipment at Shaw Air Force Base, March 3, 2025. Saulters is part of the team working to maintain the F-16s, supporting the squadron's mission of aircraft upkeep and readiness. (U.S. Air Force photo by Senior Airman Meghan Hutton)
Details Download

20th Equipment Maintenance Squadron Airmen use new chromate-free primer

U.S. Air Force Senior Airman Ryan Helmer, 20th Component Maintenance Squadron aircraft structural maintenance journeymen, sands the clamshell of an F-16 Fighting Falcon at Shaw Air Force Base, March 3, 2025. Helmer contributes to the daily operations of the squadron, helping maintain the fleet's performance and longevity. (U.S. Air Force photo by Senior Airman Meghan Hutton)
Details Download

20th Equipment Maintenance Squadron Airmen use new chromate-free primer

U.S. Air Force SrA Brendan Mordhorst, left, and Staff Sgt. William Smith, right, 20th Component Maintenance Squadron aircraft structural maintenance journeymen, sand the vertical stabilizer of an F-16 Fighting Falcon at Shaw Air Force Base, March 3, 2025. The new primer provides the same corrosion protection and coating adhesion as its chromated predecessor, ensuring effective aircraft maintenance. (U.S. Air Force photo by Senior Airman Meghan Hutton)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Airmen from the 386th Expeditionary Maintenance Squadron combat metals flight pose for a group photo within the U.S. Central Command area of responsibility, Feb. 28, 2025. The team specializes in aircraft structural repairs, component fabrication, corrosion control, and support for aerospace ground equipment maintenance. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Kaden Birch, 386th Expeditionary Maintenance Squadron aircraft metals technology journeyman, cuts tubing for a hood vent holder within the U.S. Central Command area of responsibility, Feb. 28, 2025. The hood vent holder designed by the 386th EMXS combat metals flight streamlines maintenance operations, reducing manpower requirements and enhancing safety. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Kaden Birch, 386th Expeditionary Maintenance Squadron aircraft metals technology journeyman, fabricates a custom bracket for a field deployment tool within the U.S. Central Command area of responsibility, Feb. 28, 2025. The bracket, engineered by the 386th EMXS combat metals flight, improves the functionality of the tool, ensuring increased efficiency and durability during its use. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Quentin Claxton, 386th Expeditionary Maintenance Squadron aircraft structural maintenance journeyman, applies protective coating within the U.S. Central Command area of responsibility, Feb. 28, 2025. Aircraft structural maintenance specialists apply protective coatings and markings to ensure durability and preserve mission capabilities. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Quentin Claxton, 386th Expeditionary Maintenance Squadron aircraft structural maintenance journeyman, inspects a ball joint valve for pin holes within the U.S. Central Command area of responsibility, Feb. 28, 2025. The valve will serve as an emergency shutoff system, designed to minimize water outages and improve resilience of base infrastructure. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Kaden Birch, 386th Expeditionary Maintenance Squadron aircraft metals technology journeyman, performs a weld on a structural component for a forward operating base generator within the U.S. Central Command area of responsibility, Feb. 28, 2025. The weld, completed by the 386th EMXS combat metals flight, enhances the structural integrity of the generator, minimizing downtime and improving operational readiness. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Jorge Vidal Alvares, 386th Expeditionary Maintenance Squadron aircraft metals technology journeyman, polishes a piece of equipment within the U.S. Central Command area of responsibility, Feb. 28, 2025. Vidal and his team specialize in aircraft structural repairs, component fabrication, corrosion control, and support for aerospace ground equipment maintenance. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Senior Airman Jorge Vidal Alvares, 386th Expeditionary Maintenance Squadron aircraft metals technology journeyman, conducts mill machinery training within the U.S. Central Command area of responsibility, Feb. 28, 2025. This training enhances precision machining capabilities, enabling aircraft metals technology specialists to fabricate and repair critical aircraft components, ensuring mission readiness. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download

386 EMXS combat metals flight: innovating for mission readiness

U.S. Air Force Staff Sgt. Ulyses Medina, 386th Expeditionary Maintenance Squadron aircraft metals technology craftsman, welds a portion of an emergency water shut off valve within the U.S. Central Command area of responsibility, Feb. 28, 2025. The valve, designed in collaboration with the 386th Expeditionary Civil Engineer Squadron, aims to reduce water outages by allowing localized shutoffs during infrastructure repairs. (U.S. Air Force photo by Airman 1st Class Sarah Ortega Corona)
Details Download